Home > Articles > 2002 Nissan Altima Repair Manual S/SL/SE 2.5/3.6 DOWNLOAD

Topics

2002 Nissan Altima Repair Manual S/SL/SE 2.5/3.6 DOWNLOAD
 
Submitted By Administrator on 2013-05-16( Views : 1447 ) ( Votes : 0 )
IN Service and Repair

DOWNLOAD; this 2002 Nissan Altima S/SL/SE/RWD 2.5L/3.6L repair manual was manufactured to be a technical reference for repair and maintenance for the automobile. It details a comprehensive, step-by-step guide for detecting important problems with the vehicles parts and components, and knowledge on how to fix the problem; and performing inspection, removal, disassembly, cleaning, assembly and part reinstalling procedures.


The manual contains detailed diagrams and illustrations for added help to the mechanic. This manual is for the 2002 Nissan Altima model.


YEAR

INSTANT DOWNLOAD LINK

2002

Nissan Altima Repair Manual


Nissan Altima Engines and Models

  • 2002 Altima 2.5 - 2.5L 175 hp 4-Cylinder

  • 2002 Altima 2.5 S - 2.5L 175 hp 4-Cylinder

  • 2002 Altima 2.5 SL - 2.5L 175 hp 4-Cyl.

  • 2002 Altima 3.5 SE - 2.5L 240 hp V6

  • 2002 Altima 300 RWD - 3.6L 292 hp V6


Example of Service Procedures:

PISTON & CONNECTING ROD

INSTALLATION

(1) Lubricate the cylinder bores with clean engine oil.

(2) Generously lubricate the rings and piston skirts with clean engine oil.

(3) Compress the rings using a piston ring compressor tool. If using a strap-type ring compressor, make sure the inside end of the strap does not hook on a ring gap and break the ring.

DIAGNOSIS AND TESTING-ENGINE OIL PRESSURE

(1) Remove the engine oil pressure sensor and install Oil Pressure Line and Gauge Tool C-3292 with a suitable adapter.

(2) Start engine and warm to operating temperature.

(3) Record engine oil pressure and compare with engine oil pressure chart.

INTAKE MANIFOLD

REMOVAL

(1) Disconnect the battery negative cables.

(2) Remove the charge air cooler outlet tube from the air inlet housing.

(3) Remove the engine oil dipstick tube mounting bolt. Position dipstick tube to the side.

(4) Disconnect the air grid heater power cables at the cable mounting studs

GEAR HOUSING

REMOVAL

(1) Disconnect the battery negative cables.

(2) Raise vehicle on hoist.

(3) Remove the oil pan and suction tube.

(4) Partially drain engine coolant into container suitable for re-use.

(5) Lower vehicle.

(6) Remove radiator upper hose.

(7) Disconnect coolant recovery bottle hose from radiator filler neck and lift bottle off of fan shroud.

CATALYTIC CONVERTER - 2.5L/3.6L

INSPECTION

Look at the stainless steel body of the converter, inspect for bulging or other distortion that could be a result of overheating. If the converter has a heat shield attached make sure it is not bent or loose. If you suspect internal damage to the catalyst, tap- ping the bottom of the catalyst with a rubber mallet may indicate a damaged core.

FRONT FASCIA

REMOVAL

(1) Open hood.

(2) Remove fasteners at fender side openings. (3) Separate fascia from bumper.

INSTALLATION

(1) Position fascia on bumper.

(2) Install front fascia. See fascia adjustment procedure in this section.

(3) Install fasteners at fender side openings.
 
Your Advertise Goes Here.